Vanemar Blog

Back in Amsterdam with our charter customers at ICE 2026

In Amsterdam, charter operators told us what it’s like to use Vanemar on their boats. At the stand, we showed how alerts reach the helm and what a generator or windlass log can tell the base team.

4 min read
Group photo beside the Vanemar sensor and chartplotter display at International Charter Expo 2026.

We were back in Amsterdam for the International Charter Expo from November 11 to 13. Some of the charter teams who stopped by already use Vanemar on their boats. Others came to see how their base staff could use Vanemar Fleet to check boat locations, respond to onboard alerts and review equipment use in one place.

What it’s like to use Vanemar on a charter fleet

We asked customers at ICE how long they’d been using Vanemar and what they thought of it. Begüm of SailOn Yachting opens the film with her team’s verdict: “It was the best decision we made.”

Nazlı of Rudder & Moor said her team had used Vanemar for almost five years. In her words, “I think it’s so easy to use.” Watch Nazlı at 0:12.

Akbulut Kahraman of SaySail said the company had used Vanemar since 2022. His description was “always working, always connected.” Watch Akbulut at 0:25.

Vita of Sail Fleet Company told us her company had 31 boats in its fleet and had been using Vanemar for almost a year. “It makes our life and job much easier,” she said. Watch Vita at 0:31.

When a fleet alert reaches the helm

One demo in particular caught visitors’ attention. Say there’s a bay you ask your guests to avoid. Your base team can mark it as off limits in Vanemar Fleet. If a boat enters the bay, the base gets a notification and the skipper sees a warning on the chartplotter, in time to change course without waiting for a call from shore.

Vanemar Fleet on a laptop and phone, showing boat locations, a vessel’s track and marked zones on a satellite map.
The base team’s view. Marked zones sit alongside the boats and their tracks on the fleet map.

An alarm below deck can reach the helm the same way. If the water rises in the bilge or a cabin smoke detector goes off, the guest can see what happened on the chartplotter, even if they only boarded that morning. The base team gets the alert in the Vanemar app.

Vanemar product image showing a high-water alarm on a chartplotter beside the Vanemar phone app.
The skipper’s view. Here a high-water alarm appears over the navigation chart while the Vanemar app alerts the team ashore.

Operators choose which alerts to forward through the Vanemar NMEA 2000 Boat Adapter. On Raymarine, Garmin, Navico Group and Furuno chartplotters, support depends on the model. See which NMEA 2000 alert messages the display needs to support.

What the generator and windlass logs tell the base team

When a boat comes back, the base team may want to know how many hours the generator ran. With the new DC Indicator support for the Vanemar Battery Sensor, a sensor wired to the generator’s run signal logs each start and stop. Staff can check an individual run or look up the total.

With the anchor windlass, each press of the control tells part of the story. In the example below, the guest presses for four seconds, pauses for three, then presses twice more. The last press lasts 19 seconds. If the guest mentions trouble weighing anchor, the base team has a specific moment to ask about. The DC Indicator logs how long the circuit was active. Measuring the load on the windlass takes a separate reading.

Generator runtime of 45 minutes. Separate windlass log with activations of 4, 8 and 19 seconds and pauses of 3 and 5 seconds.
Illustrative data. The generator timeline shows running hours. The windlass log shows each activation and the pause before the next one.

Related customer story · How Big Apple Charters monitors its fleet in New York

Six photos from Vanemar’s stand at ICE 2026, showing visitors examining the demo panel, viewing a laptop demonstration and meeting with the team.
At stand S16, visitors tried the demo panel and sat down with us to look at the fleet dashboard.

Thanks to everyone who stopped by in Amsterdam. If you missed us, we’d be happy to show you how these features would work on a boat in your fleet.

Book a Vanemar Fleet walkthrough

Back to blog

Vanemar Support

Questions after reading? Our team is happy to help.

If you have questions about anything you’ve read, or want to know how it applies to your boat, just get in touch.

  • Install in 30 minutesNo cables
  • 30-day returnsChoose with confidence
  • After-sales supportWe’re here from installation through everyday use