Taxes calculated at checkout · 30-day no-questions-asked returns
Try it for 30 days. If it is not right for you, get a full refund including shipping.
Remote monitoring, push alerts and automated phone calls require a Vanemar Connect subscription.
Expand your Vanemar boat security system with the Vanemar wireless door entry sensor. Install this compact entry sensor on compatible hatches, windows, doors or drawers and receive an alert when an armed entry point is opened.
STAY AWARE OF ACCESS ABOARD
The cabin door should not be a question mark after you leave. Monitor the access points you choose and get an alert if one opens while Protection mode is armed.
A monitored door opening can reach you as an app alert, giving you a reason to check who is aboard or contact the marina.
Cover the cabin entrance, then add sensors for other suitable hatches, windows or drawers you want to follow individually.
Switch to Onboard mode when you return, so normal door activity does not trigger intrusion alarms. Arm Protection mode again when you leave.
FROM THE CABIN DOOR TO YOUR PHONE
Whether the boat is across the marina or far from home, an opening alert gives you something specific to follow up on.
Name each sensor for its location, such as “Cabin door” or “Forward hatch”. An alert then gives your check a clear starting point. You can contact someone who has access to the boat or ask the marina to inspect it.
The sensor reports an opening; you decide whether it was expected and what to do next.
A window, hatch or storage drawer may deserve its own sensor. The compact sensor and magnet sit beside each other when the opening is closed and separate when it opens.
Battery power and a wireless link to the Gateway mean no sensor cable to run back through the boat. Choose positions that meet the installation guide’s mounting and environmental requirements.
A CLOSER LOOK
Choose the openings you want to monitor, then check alignment and wireless reception before completing the installation.
Fit the body and magnet close together when closed, following the alignment and gap instructions for your sensor.
The sensor can report when its cover is disturbed, adding another event to your Vanemar monitoring.
Low-battery warnings in the app help you plan a battery change. Follow the sensor guide for replacement and testing.
BEFORE YOU ARM THE BOAT
Entry intrusion alarms operate when the system is armed in Protection mode. Use Onboard mode during normal activity aboard to disarm entry and motion intrusion monitoring. Your security countdown settings can affect when an alarm is raised.
No. The sensor detects whether its body and magnet are together or separated. That gives an open or closed contact status, not confirmation that a lock is engaged. Keep your usual physical checks before leaving.
Entry Sensor monitors a specific door, hatch, window or drawer opening. A Motion Sensor detects movement in the area it covers. They can complement each other when you want to monitor both access points and activity inside a cabin.
Use a separate sensor for each opening you want to monitor. Choose a suitable mounting position, follow the gap and alignment guidance, and name each sensor by location in the app.
Alongside opening detection, the sensor supports cover-tamper and low-battery warnings. Check that the relevant alerts are enabled in your Vanemar setup.
Pair the sensor with a Vanemar Gateway, activate Vanemar Connect and keep the Gateway online. Enable app and phone notifications, check that the sensor’s alerts are not silenced, and arm Protection mode when leaving.
Real Owners
First-hand experiences from boat owners who use Vanemar.
Yorumlar yükleniyor…
Vanemar Support
Tell us about your boat’s doors, hatches and windows. We’ll help you plan sensor positions and build a setup that suits your layout.
